SUIMP02GBBT, alarmy, schematy pl
[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
SUBARU
MOD.
IMPREZA*
YEAR.
02
fi
PETROL
DIESEL
X
MAKE
* Models with originalequipment keyless entry system.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, on the
panel of the wheel housing, passenger’s side.
The modular systems and the modules should be fixed on the left, under the
dashboard, driver’s side.
POWER SUPPLY
+ 30:
connect to the ground terminal at the entrance of the fuse box.
- 31:
connect with a cable terminal to the car body.
DIRECTION INDICATORS
Connect to the BLACK/GREEN and LIGHT GREEN/BLACK wires located in the
wiring harness coming out of the 17 way white connector, placed in the central
locking unit, above the fuse box, under the driver’s side door.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the 1,5 mm
2
BLUE/RED wire located in the wiring harness coming out of the
windows switches, directly inside the driver’s side door.
Front window, passenger’s side:
cut the 1,5 mm
2
RED/BLUE wire.
Rear window, driver’s side:
cut the 1,5 mm
2
GREEN/YELLOW wire.
Rear window, passenger’s side:
cut the 1,5 mm
2
WHITE/BLUE wire.
The connections should be made in the wiring harness, coming out of the 25 way
white connector, placed on the base of the driver’s side member.
CENTRAL DOORS LOCKING Connection vehicle/art. 3800
Refer to the
diagram nr. 141
.
IMMOBILISATION POINT
Fuel pump
Cut the 1,5 mm
2
GREEN/RED wire, located in the wiring harness coming out of
the 12 way white connector, of the central of the immobilisator fixed to the
steering column.
STARTER
+50:
Cut the BLACK/WHITE wire located in the wiring harness coming out of the
4 way blue connector, placed on the right of the steering column.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, in
correspondence with the left lateral headlamp.
DOORS SWITCH
Connect to the YELLOW wire located in the central doors locking unit placed
above the fuse box, under the driver’s side dashboard.
BOOT SWITCH
Connect to the YELLOW/RED wire located in the wiring harness coming out of
the connector of the boot lamp.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
suimp02gbbt.doc
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 141
Diagram to connect art. 3800 on
SUBARU IMPREZA
ART. 3800
ORANGE
ORANGE/WHITE
+30
VIOLET/WHITE
Central locking unit GREY/BLACK
ORANGE
YELLOW/BLACK
M
RED/GREEN
VIOLET
WHITE
17 way white connector
Note:
The central locking unit is located above the fuse box,
under the dashboard, driver’s side.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
suimp02gbbt.doc
[ Pobierz całość w formacie PDF ]