Samsung Remote Unlocking, Programy nowości
[ Pobierz całość w formacie PDF ]
REMOTE UNLOCKING VIA
KEYPAD
Brought to you by KingJase
Samsung UnlockCode For G600,D900,D900i,D500,D600,D600E,S500,E250,E250v,J700,J700v
Please follow the instructions carefully but if the code fails to work, then ,make no more
than 4 attempts as it may lock your phone. Can you let me know how you get on with it as
well please. Thanks. Please also make sure that you back up any information on your
phone as in certain cases the resetting also removes your contacts from the SIM and your
pictures.
1. Turn off the mobile phone.
2. Insert a "Non-accepted" SIM card (sim card that wont work) half way in so that when you
turn on the phone, it still says "Insert SIM".
3. Turn on the phone
4. The phone will still say "Insert SIM". This is where you need to push the sim card all the
way in. You can use a paperclip or a tiny object to push it in if you have difficulty.
IT IS IMPORTANT THAT THE PHONE REMAINS ON AT THIS STAGE (TRY NOT TO LET BATTERY
FALL OUT) IF BATTERY FALLS OUT, DO NOT PANIC, JUST START FROM STEP 2 AGAIN.
5. Enter the following code and wait patiently for phone to reset: *2767*3855#
6. After reset is completed, SIM should work and also the reception. Don't get excited, its
not unlocked yet.
7. Now we want to make it permanent. First check what locks need to be deactivated with
the following code: *#7465625# this tells you what ones need to be deactivated, for phone
to become unlocked
network lock – inactive
subset lock - inactive
sp lock - inactive
cp lock - inactive
sim lock - inactive
activa lock - inactive
1
phone lock - inactive
auto network - inactive
auto subset lock - inactive
auto sp lock – inactive
auto cp lock - inactive
auto sim lock - inactive
"a)" is the common one that usually is the only one required, but if other locks are active, its
best to disable them now while you have the chance. (if you only do part A when you turn
phone off and back and it ask for a sp lock reset the phone *2767*3855# then follow step C
but you should have disabled your SP lock before you disabled your Network Lock, I.E. do
step c then step a)
a) If Network Lock is "Active", put in the following code:
*7465625*638*00000000*00000000#
Message should be "Network Lock has been personalised" or similar.
Then: #7465625*638*00000000#
Message should be "Network Lock deactivated" or similar.
------------------------------------------------------------------------
b), If Subset Lock is "Active", put in the following code:
7465625*782*00000000*00000000#
Message should be "Subset Lock has been personalised" or simil-
#7465625*782*00000000#
Message should be "Subset Lock deactivated" or similar.
------------------------------------------------------------------------
c) If SP Lock is "Active", put in the following code: *7465625*77*00000000*00000000#
Message should be "SP Lock has been personalised" or similar.
Then: #7465625*77*00000000#
2
ar. Then:
Message should be "SP Lock deactivated" or similar.
------------------------------------------------------------------------
d) If CP Lock is "Active", put in the following code: *7465625*27*00000000*00000000#
Message should be "CP Lock has been personalised" or similar.
Then: #7465625*27*00000000#
Message should be "CP Lock deactivated" or similar.
------------------------------------------------------------------------
e) If SIM Lock is "Active", put in the following code: *7465625*746*00000000*00000000#
Message should be "SIM Lock has been personalised" or similar.
Then: #7465625*746*00000000#
Message should be "SIM Lock deactivated" or similar.
Samsung Sgh e100, e105, e700,e708, e715, p100, p400, p407,
p408, s200, s208, s300, s307, s308, v200, v205, v206, x105, x426,
x427
1. Turn off your phone, put in a SIM
CARD
of a provider that it is LOCKED to
o
(different company's SIM card), and turn it back on.
2. At the wrong card message, type *#9998*3323#. A message will pop up telling you to
press exit, so hit the right soft key. Choose number 7 (or 8 or 9 will work too, I think). Your
phone will reboot and your SIM will work.
3. Type *0141# and then hit call. This will give you a message saying your phone is
personalized.
4. Power down your phone and insert a SIM card other (another company) than the one
that is in it. Then power up your phone.
5. At the SIM pass code prompt type 00000000, so that will totally unlocks your phone.
To enter wap settings: Enter *#vswap# or numerically, *#87927#
To enter mms settings: Enter *#vsmms# or numerically, *#87667#
1
[ Pobierz całość w formacie PDF ]