Safe diy, Complete Do-It-Yourself Manual
[ Pobierz całość w formacie PDF ]
SAFE DIY
Whenever you are carrying out DIY, your working practices
don't only affect you - they could also affect the safety of
anyone else nearby.
If a job is worth doing at all, it's worth doing safely.
Safety should always be a top priority for anyone who is
involved in DIY. Many of the hundreds of accidents that
happen each day in the home or garden could be easily
avoided with a little thought. However experienced you are,
it always pays to take time to plan your work, and to think
about any safety issues before you start.
Ultimately, the success of any DIY project can be affected by
the attitude you have to safety. Let safety be the first thing
you think of before starting a job, and the last thing you
think of when finishing it - so that it becomes an integral
part of everything you do. This leaflet contains a wealth of
suggestions that will help you to think about safety, and to
practise it.
2
- Be prepared
Preparation and planning are key elements of good safety
practice. They not only help to keep you safe - they can also
save both time and money.
Before starting a job, be realistic about how long it will take.
Have regular breaks to avoid tiredness or loss of
concentration. If it takes longer than you expected, don't
start cutting corners or speeding up - take your time and
make sure the job is done properly.
Avoid loose clothing, tie back long hair (or tuck it under a
hat), and remove any loose jewellery, including earrings,
necklaces, bracelets and watches.
Before you start any plumbing work, check the location and
condition of items such as stopcocks and gate valves. Ensure
that they can be quickly opened or shut in the event of an
emergency.
It may seem obvious, but
always read through any
instruction leaflets
beforehand - especially if y
are using an unfamiliar piece
of equipment. Don't assume
you know how it works -
check it out first. Make sure
you have a First Aid kit (with
contents that are not past
their 'sell by' date) and keep
it somewhere handy (1).
Switch off at the mains when working with electricity. Tape
over any broken or unusable switches, and make sure that
any broken items are replaced as soon as possible.
Make up a simple electricity repair kit for basic emergencies.
This should contain a torch (with working batteries), rubber
gloves, insulated pliers and screwdrivers, insulating tape,
spare bulbs, fuses and fuse wire.
Don't be too proud to ask for help. If in doubt at any time,
don't take risks - contact a professional.
3
- The tools of the trade
Always use the right tools for the project - don't be tempted
to improvise! Don't use tools which have loose heads or
handles. If you need to buy new tools, check the labels and
opt for ones which are made to a British or European
standard or which have an approved quality and safety
mark.
Always read the instructions before use. Maintain all tools in
a good, clean condition - especially electrical appliances.
Keep the cover guards on sharp tools when they are not
being used. Use a toolbox with a tidy, so that everything is
instantly at hand.
ou
Don't forget to wear the
correct protective clothing at
all times - including strong
shoes, gloves, eye and ear
protection, safety helmet a
dust masks etc (2).
4
- The ladder of success
Many DIY accidents are caused by the careless use of
ladders or scaffolding. Always inform someone of what you
are doing.
Use sensible shoes when working on ladders - not sandals or
bare feet.
The bottom of the ladder (which should preferably have non-
slip feet) should rest on a hard, level surface. Similarly, the
top should rest against a solid surface. Don't prop it against
glass, window sills or gutters - where necessary use a pre-
fitted stand-off.
Many accidents are caused by slipping ladders, so secure
both the bottom and top parts to something firm and strong
with ropes or straps.
When you need to move the ladder, ask someone to help
wherever possible. Always move or extend a ladder rather
than risk overreaching.
Make sure your ladder is at a safe angle - the distance of the
feet from the wall or vertical surface should be a quarter of
the ladder's height. A 6m (20ft) ladder should therefore be
1.5m (5ft) away from the wall at the bottom (3).
nd
If you need to work on
scaffolding, always ensure
that it is erected on firm,
level ground. Scaffolding with
a 1.3m (4ft) square base
should be tied to a buildin
once the height exceeds
3.25m (11ft). Provide kic
boards around the platform.
g
k
Always w
working on scaffolding.
Gloves are also
recommended, al
may find them restrictive.
ear a helmet when
though you
5
lectricity is a potential killer, and
E
care - if in doubt, call in an expert.
should be handled with
W
seemingly harmless tasks such as washing down walls, turn
off the electricity first. Never use any electrical plugs,
sockets or equipment which have been wet, unless you ar
sure that they have thoroughly dried out.
e
E
they could overheat - check the instructions. Make sure tha
it is safe to use the extension cable with an appliance before
you start.
t
If
conditions, you should use a Residual Current Device or
power breaker. This automatically cuts off the power sup
in the case of an accident (such as a cut cable) or a
malfunction.
ply
Take care not to use too
many plugs or adaptors wi
an electrical socket - it could
overload (4). Where feasible,
check that the connections
inside each plug are tight,
and that the cord grip is tigh
around the cable (rather th
just the wires inside the
cable).
th
t
an
- Power to the people
ater and electricity don't mix. Even if you're carrying out
xtension cables often need to be uncoiled before use, or
you can't avoid working with electrical appliances in damp
All plugs should contain the correct fuse. If a fuse blows,
switch off the power and unplug the appliance before tryin
to find the fault. If in doubt, ask an expert. The same
principles apply to a mains fuse - use the correct thickn
of fuse wire and switch off at the mains before checking a
blown fuse.
Fi
recommendations, or from the recommended ratings that
are often published on fuse packets or in good DIY books.
Copy them onto a list, and keep it with your fuses.
g
ess
nd the correct fuse rating by checking the manufacturer's
B
eware of damaged, kinked or frayed cables and flexes.
6
A wide variety of hom
petroleum gas (LPG) cylinders. Although these are generally
very safe, certain precautions should be taken.
- It's a gas!
e appliances now run on liquefied
Fi
a naked flame when changing a cylinder. Remember that
even electrical tools can give off sparks.
t new cylinders in the open air. Never smoke or work near
LP
The gas is heavy and highly flammable, and will not easily
disperse in the event of a leak. LPG has a distinctive smell -
if you smell it, turn off the gas and ask an expert to check
the appliance.
G appliances should only be used in well-ventilated areas.
To check for leaks, apply
soapy water over all
connections - any leak
be shown by bubbles. Hoses
should also be checked
regularly and replaced if
are cracked (5).
they
S
v
are LPG cylinders should be stored in a secure and well
entilated area outside the house, but not below ground
s will
[ Pobierz całość w formacie PDF ]