SUVIT93GBB, alarmy, schematy pl
[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
SUZUKI
MOD.
VITARA
YEAR
93
fi
PETROL
DIESEL
X
MAKE
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, on the
panel of the left lateral shock absorber.
POWER SUPPLY
+ 30:
connect to the ground terminal at the entrance of the fuse box.
- 31:
connect directly to the car body.
IGNITION WIRE
+15/54:
find the positive ignition wire verifying its presence also during the engine
firing.
DIRECTION INDICATORS
Connect to the GREEN/RED and GREEN/YELLOW wires located in the wiring
harness coming out of the 20 way light blue connector, on the left of the steering
column, under the dashboard, driver’s side.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the 1,5 mm
2
YELLOW wire.
Front window, passenger’s side:
cut the 1,5 mm
2
GREEN/BLACK wire.
The wires are located in the wiring harness coming out of the respective switches.
CENTRAL DOORS LOCKING Negative control signal
Connect to the 1 mm
2
PINK wire with GREY references (lock) and to the
PINK/BLACK wire with GREY references (unlock) located in the wiring harness
coming out of the driver’s side door.
IMMOBILISATION POINT
Fuel pump
Cut the 1,5 mm
2
BLACK/WHITE wire with BROWN references located in the wiring
harness coming out of the green fuel pump relay on the left of the steering column,
under the dashboard, driver’s side.
BONNET SWITCH
Install an additional switch on the headlamp support plate, near the original rubber
bonnet stop.
DOORS SWITCH
Connect to the 1 mm
2
BLACK/RED wire located in the wiring harness coming out
of the 20 way light blue connector, on the left of the steering column, under the
dashboard, driver’s side.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
suvit93gbb.doc
[ Pobierz całość w formacie PDF ]