SULIA04GBBT, alarmy, schematy podłączeń alarmow w samochodach
[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
SUZUKI
LIANA*
YEAR.
04
fi
PETROL
DIESEL
X
MAKE
MOD.
* Models with original equipment keyless entry system.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens on the bulkhead that divides the engine
compartment and the passenger’s compartment on the side of the servobrake.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, driver’s side.
POWER SUPPLY
+30:
connect to the WHITE/GREEN wire in the black connector of the ignition key.
-31:
connect to one of the ground terminals located behind the driver’s side bulkhead.
IGNITION WIRE
+15/54:
connect to the YELLOW/BLACK wire in the black connector coming out of the
ignition key.
DIRECTION INDICATORS
Connect to the GREEN/RED/SILVER wire and to the BLUE/YELLOW/SILVER wire, in the
12 way grey connector, located on the connectors holder, under the driver’s side
dashboard, behind the fuse box.
ELECTRIC WINDOWS
Negative controls
Front window, driver’s side:
cut the RED/SILVER wire in the push buttons panel, inside the driver’s side door.
Front window, passenger’s side:
cut the RED/WHITE/SILVER wire in the push buttons panel, inside the driver’s side door.
Rear window, driver’s side:
cut the RED/YELLOW/SILVER wire located in the bundle of cables behind the driver’s
side sill cover.
Rear window, passenger’s side:
Cut the WHITE/RED/SILVER wire located in the bundle of cables behind the driver’s side
sill cover.
ACTIVAT./DEACTIVATION
Connections antitheft/vehicle
CONTROLS
Position
Pos. nr.6 in the white connector
Pos. nr.7 in the white connector
12 way grey connector
car body
car body
car body
Refer to
the “A” diagram
of the dedicated installations manual in the kit of the antitheft.
The 18 way white connector and the 12 way grey connector are located on the
connectors holder plate, under the driver’s side dashboard, behind the fuses holder box.
Vehicle
RED/BLUE
BLACK/GREEN
BLUE/YELLOW/SILVER
Ground
Ground
Ground
IMMOBILISATION POINT
Fuel pump
Cut the PINK wire with two SILVER points, in the bundle of cables behind the driver’s
side sill cover.
STARTER
+50:
Cut the BLACK/YELLOW wire located in the wiring harness coming out of the
ignition key.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, driver’s side.
DOORS AND BOOT
SWITCH
Connect to the BLACK/RED/SILVER wire, at the position nr.15, in the 18 way white
connector, on the connectors holder plate, under the driver’s side dashboard, behind the
fuses holder box.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
sulia04gbbt.doc
Art.3800
YELLOW/BLACK
GREY/BLACK
VIOLET
ORANGE
VIOLET/WHITE
ORANGE/WHITE
[ Pobierz całość w formacie PDF ]