SUIGN02GBB, alarmy, schematy podłączeń alarmow w samochodach
[ Pobierz całość w formacie PDF ]
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
SUZUKI
IGNIS
YEAR.
02
fi
PETROL
DIESEL
X
MAKE
MOD.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens on the support of the shock
absorber, driver’s side. Pass the cables through the original rubber sleeve
located in the bulkhead that divides the engine compartment and the driver’s side
passenger’s compartment , the same rubber sleeve of the bonnet opening wire.
CENTRAL UNIT POSITION
The modular systems and the modules should be positioned under the
dashboard, driver’s side.
POWER SUPPLY
+30:
connect to the 3 mm
2
RED wire located in a multiway connector, in the fuse
box.
- 31:
connect to one of the ground terminal located behind the left lateral
bulkhead, driver’s side.
IGNITION WIRE
+15/54:
Connect to the YELLOW wire with SILVER references located in the
wiring harness behind the sill cover, driver’s side.
DIRECTION INDICATORS
Connect to the BLUE/YELLOW wire with SILVER references and to the
GREEN/RED wire with SILVER references located in the wiring harness behind
the driver’s side sill cover.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the the RED wire with SILVER references located in the wiring harness
coming out of the control switch, directly inside the driver’s side door.
Front window, passenger’s side:
cut the RED/WHITE wire with SILVER references, at the position nr. 7, coming
out of the 14 way white connector, located under the dashboard driver’s side, in
the upper part of the bulkhead.
CENTRAL DOORS LOCKING
Negative control signal
To make the lock and unlock of the doors, it is necessary to cut the
BROWN/WHITE wire with SILVER references located in the wiring harness
coming out of the 14 way white connector, placed in the upper part, under the
dashboard, driver’s side. For the Bridge serie antithefts make reference to the
diagram nr. 97
and for the 3100 serie antithefts make reference to the
diagram
nr. 97A.
IMMOBILISATION POINT
Fuel pump
Cut the PINK wire with SILVER references located in the wiring harness behind
the sill cover, driver’s side.
STARTER
+50:
Cut the 1,5 mm
2
BLACK/YELLOW wire located in the wiring harness
coming out of the 6 way white connector, directly on the coming out of the ignition
key.
BONNET SWITCH
Install an additional switch on the front headlamp support grill, driver’s side.
DOORS AND BOOT SWITCH
Connect to the BLACK/RED wire located in the wiring harness behind the
driver’s side sill cover.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
suign02gbb.doc
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 97
Diagram to make the central locking on
SUZUKI IGNIS
year 2002
(for Bridge serie antithefts)
VIOLET/ORANGE VIOLET ORANGE YELLOW/BLACK
Door switch
BROWN/WHITE
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
suign02gbb.doc
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 97A
Diagram to make the central locking on
SUZUKI IGNIS
year 2002
(for 3100 and 3900 series antithefts)
VIOLET/WHITE VIOLET ORANGE YELLOW/BLACK
ORANGE/WHITE
Door switch
BROWN/WHITE
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
suign02gbb.doc
[ Pobierz całość w formacie PDF ]