Satellite A10, KOMPUTERY, Toshiba
[ Pobierz całość w formacie PDF ]
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
A10 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size0&1)
2. 4mm Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mats
6. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
TM
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
A10 Series
TABLE OF CONTENTS:
TOSHIBA
Tough Enough for Today’s World
TM
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
A10 Series
BATTERY PACK REMOVAL
Battery release lever
Battery pack assy
Battery cover
Battery pack
1. Turn the computer upside down as shown.
2. Slide the
battery release lever
in the direction of the
arrow.
3. Lift out the
battery pack assy
.
4. Separate the battery pack from the battery cover.
OPTIONAL PC CARD REMOVAL
HDD REMOVAL
HDD cover
PC Card
Eject button
M2.5x4 black flat head screw
1. Press the
eject button
of the PC Card you want to
remove.
2. Press the extended
eject button
to pop the
PC card
out slightly.
3. Grasp the
PC Card
and pull it out
NOTE
: Before removing any PCMCIA device, make sure
it is “STOPPED” in the PC Card Manager.
1. Turn the computer upside down.
2. Remove
two M2.5x16 black flat head screws
securing HDD slot cover
and pull out the
cover
.
.
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
A10 Series
HDD REMOVAL
HDD assy
M2.5x5 black flat head screw
HDD bracket handle
M3x4 brass flat head screws
3. Remove
one M2.5x5 black flat head screw
securing
the HDD assembly.
4. Grasp the
HDD bracket handle
and pull to
disconnect the HDD assembly.
5. Lift the
HDD assembly
out of the HDD bay.
6. Remove
four M3x4 brass flat head screws
securing
the HDD bracket to the drive.
MEMORY MODULE REMOVAL
Memory module
Memory
cover
M2.5x4 black flat head screw
Memory clips
1. Turn the computer upside down.
2. Remove
one M2.5x4 black flat head screw
securing the memory cover.
3. Lift out the
cover
.
4. Slowly spread out the
memory clips
and pull the
memory module out of the connector on a 45 degree
angle.
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
A10 Series
WIRELESS LAN CARD REMOVAL
White mini coax cable
Black mini coax cable
Mini PCI
card
Mini PCI slot cover
M2.5x4 black flat head screw
PCI clips
1. Turn the computer upside down.
2. Remove
one M2.5x4 black flat head screw
securing
the Mini PCI slot cover.
3. Lift out the
PCI slot cover
.
4. Peel off the
glass tape
securing the mini coax cables.
5. Disconnect the
white mini coax cable
from main
connector and the
black mini coax cable
from
aux connector.
6. Gently press out the
Mini PCI slot clips
and pull the
Mini PCI card
out of the connector on a 30 degree
angle.
MODEM BOARD REMOVAL
Modem
Modem slot cover
M2.5x4 black flat head screws
MJ Harness
M2x4 black screws
1. Remove
one M2.5x4 black flat head screw
securing
the modem slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the
latch securing the modem slot cover.
3. Remove
two
M2x4 black screws
securing the
modem board.
4. Gently lift up the
modem board
to disconnect it from
the system board and disconnect the MJ harness
from JP1 on the modem board.
TOSHIBA
Tough Enough for Today’s World
[ Pobierz całość w formacie PDF ]